dmesg - Intel Core 2 6400
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. P35-DS3R/P35-DS3R, BIOS F4 06/11/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CEFFF write-protect
CF000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 200000000 mask FE0000000 write-back
1 base 100000000 mask F00000000 write-back
2 base 000000000 mask F00000000 write-back
3 base 0E0000000 mask FE0000000 uncachable
4 base 0DFF00000 mask FFFF00000 write-through
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f5570] f5570
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
init_memory_mapping: 0000000000000000-00000000dfee0000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfee0000 page 4k
kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000
init_memory_mapping: 0000000100000000-0000000220000000
0100000000 - 0220000000 page 2M
kernel direct mapping tables up to 220000000 @ dfed6000-dfee0000
RAMDISK: 36960000 - 374a8000
ACPI: RSDP 00000000000f6f10 00014 (v00 GBT )
ACPI: RSDT 00000000dfee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000dfee3180 04A88 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000dfee0000 00040
ACPI: HPET 00000000dfee7d80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000dfee7e00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000dfee7c80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000dfee7e80 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 00000000dfee8310 00275 (v01 PmRef CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000220000000
Initmem setup node 0 0000000000000000-0000000220000000
NODE_DATA [000000021fffb000 - 000000021fffffff]
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217600000-ffff88021e7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00220000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000dfee0
0: 0x00100000 -> 0x00220000
On node 0 totalpages: 2096750
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 898840 pages, LIFO batch:31
Normal zone: 16128 pages used for memmap
Normal zone: 1163520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000
PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s82816 r8192 d23680 u524288
pcpu-alloc: s82816 r8192 d23680 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066281
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8183668k/8912896k available (3409k kernel code, 525896k absent, 203332k reserved, 3324k data, 572k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2133.383 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.76 BogoMIPS (lpj=8533532)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (8533.40 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at dfee0000 (12288 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 00000000dfee8280 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff] (ignored)
pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xe000-0xe01f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xe100-0xe11f]
pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0xe500-0xe51f]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfa105000-0xfa1053ff]
pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfa100000-0xfa103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xe200-0xe21f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xe300-0xe31f]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xe400-0xe41f]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfa104000-0xfa1043ff]
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xe600-0xe607]
pci 0000:00:1f.2: reg 14: [io 0xe700-0xe703]
pci 0000:00:1f.2: reg 18: [io 0xe800-0xe807]
pci 0000:00:1f.2: reg 1c: [io 0xe900-0xe903]
pci 0000:00:1f.2: reg 20: [io 0xea00-0xea1f]
pci 0000:00:1f.2: reg 24: [mem 0xfa106000-0xfa1067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfa107000-0xfa1070ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
pci 0000:01:00.0: [1002:95c5] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xf5000000-0xf500ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xa000-0xa0ff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa28] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xf5010000-0xf5013fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
pci 0000:03:00.0: [197b:2363] type 0 class 0x000106
pci 0000:03:00.0: reg 24: [mem 0xfa000000-0xfa001fff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
pci 0000:03:00.1: reg 10: [io 0xb000-0xb007]
pci 0000:03:00.1: reg 14: [io 0xb100-0xb103]
pci 0000:03:00.1: reg 18: [io 0xb200-0xb207]
pci 0000:03:00.1: reg 1c: [io 0xb300-0xb303]
pci 0000:03:00.1: reg 20: [io 0xb400-0xb40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfa0fffff]
pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:04:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:04:00.0: reg 18: [mem 0xf7000000-0xf7000fff 64bit]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:05:00.0: [8086:100e] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [mem 0xf9020000-0xf903ffff]
pci 0000:05:00.0: reg 14: [mem 0xf9000000-0xf901ffff]
pci 0000:05:00.0: reg 18: [io 0xd000-0xd03f]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:02.0: [9005:0010] type 0 class 0x000100
pci 0000:05:02.0: reg 10: [io 0xd100-0xd1ff]
pci 0000:05:02.0: reg 14: [mem 0xf9040000-0xf9040fff 64bit]
pci 0000:05:02.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e800 - 000000000009ffff
reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3f]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xdff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0290-0x029f]
pnp 00:01: [io 0x0800-0x087f]
pnp 00:01: [io 0x0290-0x0294]
pnp 00:01: [io 0x0880-0x088f]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: [io 0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x0090]
pnp 00:02: [io 0x0094-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0073]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x03f0-0x03f5]
pnp 00:06: [io 0x03f7]
pnp 00:06: [irq 6]
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io 0x0378-0x037f]
pnp 00:08: [io 0x0778-0x077b]
pnp 00:08: [irq 7]
pnp 00:08: [dma 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: [io 0x0400-0x04bf]
system 00:0b: [io 0x0400-0x04bf] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xf0000000-0xf3ffffff]
system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x000d6800-0x000d7fff]
pnp 00:0d: [mem 0x000f0000-0x000f7fff]
pnp 00:0d: [mem 0x000f8000-0x000fbfff]
pnp 00:0d: [mem 0x000fc000-0x000fffff]
pnp 00:0d: [mem 0xdfee0000-0xdfefffff]
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x00100000-0xdfedffff]
pnp 00:0d: [mem 0xfec00000-0xfec00fff]
pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
pnp 00:0d: [mem 0xfee00000-0xfee00fff]
pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
pnp 00:0d: [mem 0xfff00000-0xffffffff]
pnp 00:0d: [mem 0x000e0000-0x000effff]
system 00:0d: [mem 0x000d6800-0x000d7fff] has been reserved
system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0d: [mem 0xdfee0000-0xdfefffff] could not be reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0xdfedffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0e: [mem 0xffb80000-0xffbfffff]
pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.4: BAR 15: assigned [mem 0xfa200000-0xfa2fffff pref]
pci 0000:00:1e.0: BAR 15: assigned [mem 0xfa300000-0xfa3fffff pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xfa400000-0xfa6fffff pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xfa700000-0xfa8fffff 64bit pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xfa900000-0xfaafffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xfab00000-0xfacfffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.0: bridge window [mem 0xfa900000-0xfaafffff]
pci 0000:00:1c.0: bridge window [mem 0xfab00000-0xfacfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfa0fffff]
pci 0000:00:1c.3: bridge window [mem 0xfa700000-0xfa8fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xfa400000-0xfa41ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.4: bridge window [mem 0xfa400000-0xfa6fffff pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xfa300000-0xfa31ffff pref]
pci 0000:05:02.0: BAR 6: assigned [mem 0xfa320000-0xfa33ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1e.0: bridge window [mem 0xfa300000-0xfa3fffff pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0xfa900000-0xfaafffff]
pci_bus 0000:02: resource 2 [mem 0xfab00000-0xfacfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfa0fffff]
pci_bus 0000:03: resource 2 [mem 0xfa700000-0xfa8fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:04: resource 2 [mem 0xfa400000-0xfa6fffff pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 [mem 0xfa300000-0xfa3fffff pref]
pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.1: PCI INT B disabled
pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.2: PCI INT C disabled
pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 11552k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800dbed6000 - ffff8800dfed6000
software IO TLB at phys 0xdbed6000 - 0xdfed6000
audit: initializing netlink socket (disabled)
type=2000 audit(1012615397.484:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 16006
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2002-02-02 02:03:18 UTC (1012615398)
Initializing network drop monitor service
Freeing unused kernel memory: 572k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 668k freed
Freeing unused kernel memory: 684k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udevd[49]: starting version 175
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 44 for MSI/MSI-X
r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000c6e000, 00:1a:4d:4c:68:b9, XID 18000000 IRQ 44
r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
libata version 3.00 loaded.
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pata_jmicron 0000:03:00.1: setting latency timer to 64
uhci_hcd: USB Universal Host Controller Interface driver
scsi0 : pata_jmicron
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa105000
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa104000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.2.0-3-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
Floppy drive(s): fd0 is 1.44M
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xfa106000 port 0xfa106100 irq 45
ata4: SATA max UDMA/133 abar m2048@0xfa106000 port 0xfa106180 irq 45
ata5: SATA max UDMA/133 abar m2048@0xfa106000 port 0xfa106200 irq 45
ata6: SATA max UDMA/133 abar m2048@0xfa106000 port 0xfa106280 irq 45
ata7: SATA max UDMA/133 abar m2048@0xfa106000 port 0xfa106300 irq 45
ata8: SATA max UDMA/133 abar m2048@0xfa106000 port 0xfa106380 irq 45
ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 19
ata10: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 19
FDC 0 is a post-1991 82077
e1000 0000:05:00.0: eth1: (PCI:33MHz:32-bit) 00:07:e9:0c:89:49
e1000 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection
aic7xxx 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata1.00: HPA detected: current 625140335, native 625142448
ata1.00: ATA-7: MAXTOR STM3320820A, 3.AAE, max UDMA/100
ata1.00: 625140335 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
usb 3-1: new low-speed USB device number 2 using uhci_hcd
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
Refined TSC clocksource calibration: 2133.333 MHz.
Switching to clocksource tsc
usb 3-1: New USB device found, idVendor=0665, idProduct=5161
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: USB to Serial
usb 3-1: Manufacturer: INNO TECH
usb 3-1: SerialNumber: 20100826
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
ata8.00: configured for UDMA/100
scsi 7:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 6:0:0:0: [sdf] Write Protect is off
sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: Attached scsi generic sg5 type 0
scsi 7:0:0:0: Attached scsi generic sg6 type 5
generic-usb 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.00 Device [INNO TECH USB to Serial] on usb-0000:00:1a.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sde: sde1
sd 5:0:0:0: [sde] Attached SCSI disk
sdd: sdd1
sd 4:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
sdf: sdf1
sd 6:0:0:0: [sdf] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 7:0:0:0: Attached scsi CD-ROM sr0
scsi10 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi: waiting for bus probes to complete ...
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
Btrfs loaded
PM: Starting manual resume from disk
PM: Hibernation image partition 8:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS (sda3): Mounting Filesystem
XFS (sda3): Ending clean mount
udevd[400]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
input: PC Speaker as /devices/platform/pcspkr/input/input3
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
udevd[456]: renamed network interface eth1 to eth2
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
parport0: Printer, Hewlett-Packard HP LaserJet 6MP
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: setting latency timer to 64
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
sr 7:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 7:0:0:0: [sr0] Sense Key : Illegal Request [current]
Info fld=0x0
sr 7:0:0:0: [sr0] Add. Sense: Logical block address out of range
sr 7:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
loop: module loaded
it87: Found IT8718F chip at 0x290, revision 4
it87: Beeping is supported
md: md0 stopped.
md: bind
md: bind
md: bind
md: bind
md: bind
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 5878.000 MB/sec
xor: using function: generic_sse (5878.000 MB/sec)
raid6: int64x1 1352 MB/s
raid6: int64x2 1437 MB/s
raid6: int64x4 1261 MB/s
raid6: int64x8 1102 MB/s
raid6: sse2x1 2985 MB/s
raid6: sse2x2 4201 MB/s
raid6: sse2x4 4806 MB/s
raid6: using algorithm sse2x4 (4806 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
bio: create slab at 1
md/raid:md0: device sdc1 operational as raid disk 0
md/raid:md0: device sdf1 operational as raid disk 4
md/raid:md0: device sde1 operational as raid disk 3
md/raid:md0: device sdd1 operational as raid disk 2
md/raid:md0: device sdb1 operational as raid disk 1
md/raid:md0: allocated 5332kB
md/raid:md0: raid level 5 active with 5 out of 5 devices, algorithm 2
RAID conf printout:
--- level:5 rd:5 wd:5
disk 0, o:1, dev:sdc1
disk 1, o:1, dev:sdb1
disk 2, o:1, dev:sdd1
disk 3, o:1, dev:sde1
disk 4, o:1, dev:sdf1
created bitmap (15 pages) for device md0
md0: bitmap initialized from disk: read 1/1 pages, set 0 of 29809 bits
md0: detected capacity change from 0 to 8001589084160
md0: unknown partition table
XFS (sda1): Mounting Filesystem
XFS (sda1): Ending clean mount
XFS (md0): Mounting Filesystem
XFS (md0): Ending clean mount
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 [email protected]).
fuse init (API version 7.17)
zfs-fuse (2312): /proc/2366/oom_adj is deprecated, please use /proc/2366/oom_score_adj instead.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:04:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth2: link is not ready
e1000: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth2: no IPv6 routers present
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV620 0x1002:0x95C5 0x1787:0x2252).
[drm] register mmio base: 0xF5000000
[drm] register mmio size: 65536
ATOM BIOS: RV620
radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 4098572 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 48 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV620 Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD2
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_KLDSCP_LVTMA
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xE0142000
[drm] vram apper at 0xE0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
set_rtc_mmss: can't update from 4 to 53
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x268 offMax=0x8e0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000).
vboxpci: IOMMU not found (not registered)